Nano Filtration Plant

Nanofiltration NF Systems – Industrial & Commercial

 

The nano filtration technique is mainly used for the removal of two valued ions and the larger mono valued ions such as heavy metals. This technique can be seen as a coarse RO (reversed osmosis) membrane.
Because nano filtration uses less fine membranes, the feed pressure of the NF system is generally lower compared to RO systems. Also the fouling rate is lower compared to Ro systems

Nano filtration (NF), in water treatment, “bridges” a gap between UF and RO membranes.  It is sometimes referred to as a loose or lower rejecting RO membrane.  It could also be called a tight UF, as NF membrane pore size ranges from .01 to a little less than .001.  Generally, an NF membrane system lets more salt pass than an RO membrane.  In addition, an NF membrane element will produce the same quantity of product at 50 to 70% the applied pressure as an RO water treatment system.

 

Other applications of nano filtration are:

  •  The removal of heavy metals from wastewater
    •    The removal of pesticides from groundwater
    •    Wastewater recycling in laundry facilities
    •    Water softening
    •    Nitrate removal from water
    •    Zinc removal from water

 

Operating Specifications:

  • feed water temperature: 42°C
  • Feed water pressure: 20 to 50 psi
  • Operating pressure: 80 to 125 psi
  • Hydrogen Sulfide must be removed
  • Turbidity should be removed
  • Iron content: 0.05 ppm
  • Equipment upgrade for higher TDS values
  • Hardness over 1 GPG requires antiscalant dosing
  • pH tolerance range: 3-11
  • Silica Tolerance: 60 ppm @ 60% recovery
  • Operate at higher TDS by lowering recovery

 

Standard Features:

  • Powder coated mild steel frame
  • 8” TFC spiral wound membranes
  • Stainless steel multi-stage pump with motor
  • FRP membrane housing
  • 5 micron cartridge prefilter
  • 460V/3Ph/50Hz power requirement
  • PLC based control panel
  • Programmable time delay and set points
  • Status indicators
  • Motor starter
  • Low pressure switch
  • High pressure switch
  • Liquid filled pressure gauges
  • Permeate conductivity monitor
  • Permeate & concentrate flow meters

 

 

Available Options:

  • Remote monitor/control option
  • Feed water conductivity monitor
  • Membrane cleaning skid
  • Automatic hourly flush
  • Feed/Permeate blending
  • 220V or 380-415V/3Ph/50 or 60 Hz
  • Product tank level switch
  • Feed pH controller with sensor
  • Feed ORP controller with sensor
  • Water and hour meters
  • Chemical dosing systems
  • Media and Iron prefiltration systems
  • Ozonation and UV sterilization systems
  • Water softeners
  • Post RO systems

Containerized NF systems